THINK SAFETY THINK ENERPAC

Specialty Lifting Equipment

9
Yes
None
1
1000000
Name...
/specialty-lifting-equipment/
Thumbnail
Product Name:
BLS-Series, Climbing Jacks Image
GBJ Series, Industrial Bottle Jacks Image
JH, JHA-Series, Aluminium and Steel Jacks Image
LW-Series, Hydraulic Vertical Lifting Wedge Image
PL-Series, Pow’R-LOCK™ Self-Locking Portable Lift System Image
PR-Series, POW
RC, P, V-Series, Extreme Environment Products Image
SOH-Series, Hydraulic Machine Lifts Image
BLS-Series, Climbing Jacks
BLS-Series, Climbing Jacks Image

Capacity per Lifting Point
50 – 200 ton
Stroke per Stage 150 – 161 mm
Max. Pressure 700 bar

A Simple Solution to Incremental Lifting

  • Climbing jacks include integral tilt saddles with maximum tilt angles up to 5˚
  • Large base with anti-rotation rod for stability and safety
  • Built-in safety valve prevents accidental over-pressurization
  • Feature to install stroke sensor
  • Ideal in combination with EVO-Series synchronous lifting pumps
  • Baked enamel finish for increased corrosion resistance
  • CR400 couplers included on all models.
Cylinder
Capacity		 Stroke Model
Number		 Max. Cylinder
Capacity
(tons)		 Cylinder Effective
Area
(in2)		 Oil
Capacity
(in3)		 Weight
(tons) (in) Push Pull Push Pull Push Pull (lbs)
55 5.91 BLS-506 55 12 11.04 3.33 67.80 20.44 375
105 6.34 BLS-1006 105 48 20.66 9.64 136.57 63.77 695
154 5.94 BLS-1506 154 74 30.71 14.79 188.56 90.80 710
220 5.94 BLS-2006 220 113 44.21 22.50 264.35 134.80 825
GBJ Series, Industrial Bottle Jacks
GBJ Series, Industrial Bottle Jacks Image

Capacity 2 – 100 tons
Stroke 62 – 460 mm

  • Lower handle effort reduces operator fatigue
  • Fully serviceable
  • High-strength beam and pump linkage for long life
  • Pumping handle included on all models
  • Safety relief valve to prevent overload
  • Automatic by-pass port to prevent over-extension
  • Wiper seal for extended life
  • Thick base material with large area for increased strength and stability during lifting
Jack
Capacity		 Stroke Model
Number		 Screw
Extension		 Minimum
Height		 Maximum
Height		 Plunger
Diameter		 Saddle
Diameter		 Base
Dimensions
L x W		 Weight
(ton) (in) (in) (in) (in) (in) (in) (in) (lbs)
2 18.11 GBJ002L – 22.44 40.55 1.14 – 5.00 x 5.00 13.2
2 3.94 GBJ002 1.97 6.30 12.20 0.83 0.83 3.74 x 4.37 7.9
3 4.13 GBJ003 2.56 6.61 13.31 0.94 0.94 3.74 x 4.57 8.6
5 5.91 GBJ005 2.95 8.35 17.20 1.14 1.14 3.74 x 4.84 11.0
8 5.91 GBJ008 2.95 8.62 17.48 1.30 1.46 3.74 x 5.43 13.0
10 5.91 GBJ010 2.95 8.62 17.48 1.46 1.46 3.74 x 5.59 14.3
10 2.44 GBJ010S 1.18 5.16 8.78 1.46 1.46 3.74 x 5.59 12.1
15 5.91 GBJ015 2.95 8.98 17.83 1.75 1.73 4.41 x 6.42 19.8
20 5.91 GBJ020 2.95 9.21 18.07 2.01 2.28 5.00 x 6.73 26.7
20 4.13 GBJ020S 2.17 7.48 13.78 2.01 2.28 5.00 x 6.73 22.0
30 5.91 GBJ030 2.95 9.53 18.39 2.26 2.56 5.59 x 7.72 34.2
50 5.91 GBJ050 – 9.92 15.83 3.15 3.15 7.09 x 9.06 62.8
100 5.91 GBJ100 – 11.81 17.72 4.33 3.70 11.65 x 13.11 191.8
JH, JHA-Series, Aluminium and Steel Jacks
JH, JHA-Series, Aluminium and Steel Jacks Image

Capacity 7 – 150 ton
Stroke 76 – 155 mm
Max. Pressure 700 bar

  • Enerpac aluminum and steel lifting jacks have a capacity of 7 to 150 tons
  • All-directional operation on 7, 15 and 35 ton JHA-series
  • Internal relief valve to prevent overloading
  • Machined flat front and bottom surfaces permit flush alignment in tight corners
  • Chrome plated plungers
  • Pumping handle included
  • Automatic by-pass port to prevent over-extension (JH-series).
Style Jack
Capacity		 Stroke Model
Number		 Jack
Effective
Area		 Collapsed
Height		 Ext.
Height		 Bottom Plate
W x L		 Plunger
Diameter		 Pump
Speed		 Weight
(ton) (in) (in2) (in) (in) (in) (in) (lbs)
Aluminum
Jack		 7 3.00 JHA-73 1.49 5.25 8.25 2.88 x 6.25 1.19 Single 11
15 6.06 JHA-156 3.14 9.75 15.81 3.63 x 9.38 1.63 Single 29
35 6.13 JHA-356 7.07 10.13 16.25 4.63 x 10.00 2.13 Single 40
75 6.06 JHA-756 15.90 11.25 17.31 6.88 x 12.81 4.50 Single 94
150 6.13 JHA-1506 30.68 12.88 19.00 9.50 x 16.06 6.25 2-Speed 210
Steel
Jack		 30 6.13 JH-306 5.94 10.00 16.13 3.75 x 9.56 2.75 Single 59
50 6.09 JH-506 9.62 10.25 16.34 5.00 x 10.19 3.50 2-Speed 90
100 6.06 JH-1006 20.63 11.31 17.37 7.13 x 12.94 5.12 2-Speed 184
LW-Series, Hydraulic Vertical Lifting Wedge
LW-Series, Hydraulic Vertical Lifting Wedge Image

Max. Lifting Force 16 ton
Lifting Stroke 21 mm
Tip Clearance / Max. Spread * 10 mm / 81,5

  • Hydraulic vertical lifting wedge has lifting force of 16 tons at 700 bar hydraulic pressure
  • Requires very small access gap of only 10 mm
  • Each step can spread under full load
  • Straight vertical lifting
  • Unique interlocking wedge design: no first step bending and risk of slipping out
  • Single-acting, spring return cylinder
  • Lifting wedge LW-16 includes safety block SB-2
  • Includes RC-Series Cylinder with CR-400 coupler.
Maximum
Lifting
Force		 Lifting
Stroke		 Model
Number		 Tip
Clearance/
Max. Spread*		 Maximum
Operating
Pressure		 Oil
Capacity		 Weight
(ton) (in) (in) (psi) (in3) (lbs)
16 .83 LW-16 .39 / 2.72 10,000 4.75 15.4
PL-Series, Pow’R-LOCK™ Self-Locking Portable Lift System
PL-Series, Pow’R-LOCK™ Self-Locking Portable Lift System Image

Rated Lifting Capacity181 ton
Stroke 356 – 622 mm
Max. Operating Pressure 700 bar

A portable lifting solution that offers continuous load locking technology for heavy lifting applications

  • Provides continuous locking protection during lift, lower and hold functions
  • Patent-pending control technology synchronizes cylinder and lock nut for smooth and efficient lifting and lowering
  • Unique double-acting cylinder offers a low collapsed height to accomodate more lifting applications
  • Simple 2-button pendant allows operation of raise and lower functions from up to 20 feet away
  • All exposed load-bearing steel cylinder components utilize a nitrocarburizing treatment to reduce wear and resist corrosion
  • Ergonomic handle has six positions for comfortable handling and folds when not in use
  • Meets ANSI/ASME B30.1-2015, AS/NZS‑2538, AS/NZS‑2693 certification criteria
Capacity Stroke Model Number Cylinder Lifting Speed *
in/min		 Recommended Air Supply ** Weight
(ton) (in) Load No Load (CFM) (psi) (lbs)
200 14.0 PL20014-ASA 2.0 2.4 130-150 55-100 1105
24.5 PL20025-ASA 2.0 2.4 1320

* Depending on available airflow, regulator setting, pump speed and load weight.
** Minimum dynamic air pressure of 55-60 psi, 90-100 psi required to achieve 200 ton capacity.
Note: When lifting large, heavy vehicles certain precautions must be followed. Always follow your published safety directions for lifting and cribbing your loads.

Accessory
Model Number		 Description Height PL20014-ASA PL20025-ASA
(in)
PLC1 Flat Load Cap 1.3 x x
PLS1 Spacer 1.0 x x
PLS2 Spacer 2.0 x x
PLE5 Extension 5.0 x x
PLE7 Extension 7.0 x x
PLE9 Extension 9.0 x x
PLE11 Extension 11.0 x –
PLE14 Extension 14.0 x –
PLB12 Extension base adapter 12.0 x –
PR-Series, POW'R-RISER Lifting Jack
PR-Series, POW

Rated Lifting Capacity534-1779 kN
Stroke 356-686 mm
Max. Pressure 700 bar

  • Enerpac Pow’r-Riser lifting jacks are available in 54, 90, 136 and 181 ton capacities with pneumatic or electric pumps for the toughest jobs
  • 102 mm ground clearance for transport over rail and rough terrain
  • Double-acting cylinder
  • Three-position handle provides easy tilt back and transport
  • Complies with ASME/ANSI B30.1:2015 & CE specifications
  • Easy-to-change external filter minimizes down time
  • Rugged, fully enclosed 610 mm wide frame with no exposed fittings or hoses
  • SUP-R-STACK™ Extension System allows lifting at all heights without blocking.
Capacity  Stroke Electric Pump Model Number  Weight Air Pump  Weight Max. Additional Stack Height
Using Opt. Ext. System		 Valve Type
(ton) (in) 115 VAC*** (lbs) (lbs) (in)
60 14 PREMB06014L 390 PRAMA06014L 390 32* Manual
27 PREMB06027L 600 PRAMA06027L 600 11
100 16 PREMB10016L 510 PRAMA10016L 510 21** Manual
27 PREMB10027L 600 PRAMA10027L 600 11
16 – – PRASA10016L 510 21** Pneumatic
27 – – PRASA10027L 600 11
150 15.5 – – PRASA15016L 570 21** Pneumatic
26.5 – – PRASA15027L 708 11
15.5 PREMB15016L 570 – – 21** Manual
26.5 PREMB15027L 708 – – 11
200 15.3 – – PRASA20016L 640 21** Pneumatic
24.3 – – PRASA20027L 825 11
RC, P, V-Series, Extreme Environment Products
RC, P, V-Series, Extreme Environment Products Image

Cylinder Capacity 5 – 25 ton
Stroke 54 – 158 mm
Max. Pressure 700 bar

Maximum Corrosion Resistance

  • Enerpac extreme environment cylinders, pumps, and valves are designed to withstand the harshest conditions
  • Corrosion resistant, nickel-plated valves and cylinders
  • Stainless steel pump inserts will not corrode
  • Viton® Seals provide heat and chemical resistance
  • Anodized aluminum pump reservoirs and plastic encapsulated pump bodies resist wet environments
  • Two-speed operation reduces pump handle strokes 78% compared to single-speed pumps
  • Pump handles lock for easy carrying.
Cylinder Capacity Stroke Model Number Oil Capacity Pressure Rating Collapsed Height Extended Height Weight
(ton) (in) (in3) (psi) (in) (in) (lbs)
5 3.0 RC-53NV 2.98 10,000 6.50 9.50 3.3
10 2.0 RC-102NV 4.75 10,000 4.78 6.91 5.1
10 6.0 RC-106NV 13.70 10,000 9.75 15.88 9.8
25 6.0 RC-256NV 32.23 10,000 10.75 17.00 22.0

 

Pump Type Oil Capacity Model Number Pressure Rating Oil Displacement
per Stroke		 Port Dimension Piston Stroke Weight
(in3) (psi) (in3) (in) (in) (lbs)
Two
Speed		 20 P-142ALSS 200 / 10,000 0.221 / 0.055 1/4″ – 18 NPTF .50 4.5
55 P-392ALSS 200 / 10,000 0.687 / 0.151 3/8″ – 18 NPTF 1.00 9.0

 

Valve Type Model Number Function Pressure Rating Weight
(psi) (lbs)
Manual Check Valve V-66NV Check 10,000 3.9
Pressure Relief Valve V-152NV ±3% Repeatability 800/10,000 3.5
SOH-Series, Hydraulic Machine Lifts
SOH-Series, Hydraulic Machine Lifts Image

Lifting Capacity 8,5 – 20 ton
Stroke 136 – 157 mm
Toe Clearance 20 mm
Max. Pressure 700 bar

  • Enerpac hydraulic machine lifts are designed for lifting heavy equipment with minimum available access
  • Remote hydraulic pump enhances safety
  • Low height lifting toe
  • Precision guided to reduce friction and isolate cylinder from side-loads
  • Two extendable support feet provide extra stability
  • Includes RC-Series DUO Cylinder with CR-400 coupler.
Capacity Toe Clearance (in) Stroke Model Number Oil Capacity Weight
(ton) Minimum Central Maximum (in) (in3) (lbs)
8,5 .79 3.74 6.69 5.39 SOH-10-6 13.7 59.2
20 1.18 4.33 7.48 6.18 SOH-23-6 32.0 99.2
BLS-Series, Climbing Jacks Image
BLS-Series, Climbing Jacks
Capacity per Lifting Point 50 – 200 ton Stroke per Stage 150 – 161 mm Max. Pressure 700 bar A Simple Solution to Incremen... Read More
GBJ Series, Industrial Bottle Jacks Image
GBJ Series, Industrial Bottle Jacks
Capacity 2 – 100 tons Stroke 62 – 460 mm Lower handle effort reduces operator fatigue Fully serviceable High-strength beam and pump linkage for long lif... Read More
JH, JHA-Series, Aluminium and Steel Jacks Image
JH, JHA-Series, Aluminium and Steel Jacks
Capacity 7 – 150 ton Stroke 76 – 155 mm Max. Pressure 700 bar Enerpac aluminum and steel lifting jacks have a capacity of 7 to 150 tons All-direc... Read More
LW-Series, Hydraulic Vertical Lifting Wedge Image
LW-Series, Hydraulic Vertical Lifting Wedge
Max. Lifting Force 16 ton Lifting Stroke 21 mm Tip Clearance / Max. Spread * 10 mm / 81,5 Hydraulic vertical lifting wedge has lifting force of 16 tons at 700... Read More
PL-Series, Pow’R-LOCK™ Self-Locking Portable Lift System Image
PL-Series, Pow’R-LOCK™ Self-Locking Portable Lift System
Rated Lifting Capacity181 ton Stroke 356 – 622 mm Max. Operating Pressure 700 bar A portable lifting solution that offers continuous load locking technology fo... Read More
PR-Series, POW
PR-Series, POW'R-RISER Lifting Jack
Rated Lifting Capacity534-1779 kN Stroke 356-686 mm Max. Pressure 700 bar Enerpac Pow’r-Riser lifting jacks are available in 54, 90, 136 and 181 ton capa... Read More
RC, P, V-Series, Extreme Environment Products Image
RC, P, V-Series, Extreme Environment Products
Cylinder Capacity 5 – 25 ton Stroke 54 – 158 mm Max. Pressure 700 bar Maximum Corrosion Resistance Enerpac extreme environ... Read More
SOH-Series, Hydraulic Machine Lifts Image
SOH-Series, Hydraulic Machine Lifts
Lifting Capacity 8,5 – 20 ton Stroke 136 – 157 mm Toe Clearance 20 mm Max. Pressure 700 bar Enerpac hydraulic machine lift... Read More

REACH US THROUGH OUR

ADDRESS

4659 & 4661 Kathrina Building Arellano Street, Palanan, Makati City Philippines 1235

TELEPHONE

 (02) 832-0560 / 832-0586 / 832-0602

Mobile

0927-243-6655 / 0918-903-6020

EMAIL

info@hydrauking.com

FAX

(02)  8334975

Close Menu