Hydraulic Lifting Systems
Strand Jacks
Capacity 15 – 1250 ton
Stroke 250 – 600 mm
Maximum Operating Pressure 350 bar
The strand jack lifting technique originates from the concrete post tensioning principle. A strand jack can be considered a linear winch. In a strand jack, a bundle of steel cables or strands are guided through a hydraulic cylinder; above and below the cylinder are anchor systems with wedges that grip the strand bundle. By stroking the cylinder in and out while the grips are engaged in the anchors, a lifting or lowering movement is achieved.
The motion of the cylinders is driven by hydraulic power packs. They can be electric or diesel powered. Our sophisticated SCC software program synchronizes the motion of the strand jacks and adjusts the motion to the loads per lifting point.
- Full control of lifting and lowering through SCC control
- Two sizes strand diameter: 15,7 and 18 mm
- Complete line of electric and diesel power packs
- Nickel plated telescopic pipes preventing bird caging
- Standard supplied with lifting anchor
- Automated locking – unlocking operation
- Special corrosion treated high endurance multi-use wedges
- Full range of accessories: strand dispenser, strand guide, re-coiler and strand tensioner
| Strand Diameter | Capacity* | Model Number |
No. of Strands |
Stroke | Weight |
|---|---|---|---|---|---|
| in (mm) | (ton) | (in) | (lbs) | ||
| 0.62 (15.7) | 34 | HSL3006 | 3 | 18.9 | 1,102 |
| 79 | HSL7006 | 7 | 18.9 | 1,411 | |
| 225 | HSL20006 | 19 | 18.9 | 2,860 | |
| 337 | HSL30006 | 31 | 18.9 | 4,820 | |
| 562 | HSL50006 | 48 | 18.9 | 6,930 | |
| 0.71 (18) | 17 | HSL1507 | 1 | 9.8 | 220 |
| 51 | HSL4507 | 3 | 18.9 | 1,102 | |
| 67 | HSL6007 | 4 | 18.9 | 1,433 | |
| 112 | HSL10007 | 7 | 18.9 | 1,874 | |
| 225 | HSL20007 | 12 | 18.9 | 3,086 | |
| 337 | HSL30007 | 19 | 18.9 | 4,290 | |
| 506 | HSL45007 | 31 | 18.9 | 6,724 | |
| 731 | HSL65007 | 43 | 18.9 | 8,690 | |
| 955 | HSL85007 | 55 | 18.9 | 11,023 | |
| 1124 | HSL100007 | 66 | 18.9 | 16,865 | |
| 1405 | HSL125007 | 84 | 23.6 | 18,298 |
* Capacity is based on 2.5 minimum safety factor over strand breaking load. Download brochure for details.
| Theoretical Lifting Speed (ft/hr)* | ||||||||
| Strand Jack Capacity (ton) |
Motor Size(hp) | |||||||
| 3.0 | 7.5 | 10 | 20 | 25 | 40 | 50 | 74 | |
|---|---|---|---|---|---|---|---|---|
| 17 | 52 | — | — | — | — | — | — | — |
| 34 | 39 | 43 | 52 | — | — | — | — | — |
| 51 | 39 | 43 | 52 | — | — | — | — | — |
| 67 | 30 | 33 | 43 | — | — | — | — | — |
| 79 | 30 | 33 | 43 | — | — | — | — | — |
| 112 | 26 | 30 | 36 | 52 | — | — | — | — |
| 225 | — | — | 20 | 33 | 39 | 49 | 49 | — |
| 337 | — | — | — | 23 | 26 | 36 | 36 | — |
| 506 | — | — | — | 20 | 23 | 33 | 33 | — |
| 562 | — | — | — | 20 | 23 | 33 | 33 | — |
| 731 | — | — | — | — | — | 26 | 26 | 49 |
* Theoretical lifting speeds. Each application should be evaluated to determine the optimum lifting speed for maximum safety and control. Contact Enerpac for more information.
Typical Configuration
- Set of 4 strand jacks
- 4 Power Packs
- 4 fixed anchors
- 1 SCC Control System
- 4 data cables 50 meters
- 4 Hose sets, standard length 5 meters each
Accessories
- Power Packs
- Strand Guide
- Strand Recoiler
- Strand Dispenser
- Strand Wedges
- Heavy-Lifting Strand
Strand Jacks
Capacity 15 – 1250 ton
Stroke 250 – 600 mm
Maximum Operating Pressure 350 bar
The strand jack lifting technique originates from the concrete post tensioning principle. A strand jack can be considered a linear winch. In a strand jack, a bundle of steel cables or strands are guided through a hydraulic cylinder; above and below the cylinder are anchor systems with wedges that grip the strand bundle. By stroking the cylinder in and out while the grips are engaged in the anchors, a lifting or lowering movement is achieved.
The motion of the cylinders is driven by hydraulic power packs. They can be electric or diesel powered. Our sophisticated SCC software program synchronizes the motion of the strand jacks and adjusts the motion to the loads per lifting point.
- Full control of lifting and lowering through SCC control
- Two sizes strand diameter: 15,7 and 18 mm
- Complete line of electric and diesel power packs
- Nickel plated telescopic pipes preventing bird caging
- Standard supplied with lifting anchor
- Automated locking – unlocking operation
- Special corrosion treated high endurance multi-use wedges
- Full range of accessories: strand dispenser, strand guide, re-coiler and strand tensioner
| Strand Diameter | Capacity* | Model Number |
No. of Strands |
Stroke | Weight |
|---|---|---|---|---|---|
| in (mm) | (ton) | (in) | (lbs) | ||
| 0.62 (15.7) | 34 | HSL3006 | 3 | 18.9 | 1,102 |
| 79 | HSL7006 | 7 | 18.9 | 1,411 | |
| 225 | HSL20006 | 19 | 18.9 | 2,860 | |
| 337 | HSL30006 | 31 | 18.9 | 4,820 | |
| 562 | HSL50006 | 48 | 18.9 | 6,930 | |
| 0.71 (18) | 17 | HSL1507 | 1 | 9.8 | 220 |
| 51 | HSL4507 | 3 | 18.9 | 1,102 | |
| 67 | HSL6007 | 4 | 18.9 | 1,433 | |
| 112 | HSL10007 | 7 | 18.9 | 1,874 | |
| 225 | HSL20007 | 12 | 18.9 | 3,086 | |
| 337 | HSL30007 | 19 | 18.9 | 4,290 | |
| 506 | HSL45007 | 31 | 18.9 | 6,724 | |
| 731 | HSL65007 | 43 | 18.9 | 8,690 | |
| 955 | HSL85007 | 55 | 18.9 | 11,023 | |
| 1124 | HSL100007 | 66 | 18.9 | 16,865 | |
| 1405 | HSL125007 | 84 | 23.6 | 18,298 |
* Capacity is based on 2.5 minimum safety factor over strand breaking load. Download brochure for details.
| Theoretical Lifting Speed (ft/hr)* | ||||||||
| Strand Jack Capacity (ton) |
Motor Size(hp) | |||||||
| 3.0 | 7.5 | 10 | 20 | 25 | 40 | 50 | 74 | |
|---|---|---|---|---|---|---|---|---|
| 17 | 52 | — | — | — | — | — | — | — |
| 34 | 39 | 43 | 52 | — | — | — | — | — |
| 51 | 39 | 43 | 52 | — | — | — | — | — |
| 67 | 30 | 33 | 43 | — | — | — | — | — |
| 79 | 30 | 33 | 43 | — | — | — | — | — |
| 112 | 26 | 30 | 36 | 52 | — | — | — | — |
| 225 | — | — | 20 | 33 | 39 | 49 | 49 | — |
| 337 | — | — | — | 23 | 26 | 36 | 36 | — |
| 506 | — | — | — | 20 | 23 | 33 | 33 | — |
| 562 | — | — | — | 20 | 23 | 33 | 33 | — |
| 731 | — | — | — | — | — | 26 | 26 | 49 |
* Theoretical lifting speeds. Each application should be evaluated to determine the optimum lifting speed for maximum safety and control. Contact Enerpac for more information.
Typical Configuration
- Set of 4 strand jacks
- 4 Power Packs
- 4 fixed anchors
- 1 SCC Control System
- 4 data cables 50 meters
- 4 Hose sets, standard length 5 meters each
Accessories
- Power Packs
- Strand Guide
- Strand Recoiler
- Strand Dispenser
- Strand Wedges
- Heavy-Lifting Strand
SHAS-Series, SyncHoist
Capacity Per Lifting Point 110 - 225 ton Maximum Stroke 1000 - 1500 mm Accuracy Over Full Stroke ± 1,0 mm
SFP-Series, 700 bar Split Flow Hydraulic Pumps
Reservoir 40 – 150 litres Split Flow Outlets 2,4, 6 and 8 Flow 0,45 – 4,20 l/min Max. Pressure 700 bar
EVO Synchronous Lifting Systems
Number of Lift Points 4 - 12 points Accuracy EVO-System 1,0 mm over full stroke
Hydraulic Gantries
Capacity with 4 towers 61 - 1069 ton Lift Height 3,49 - 14,55 m
SHS-Series, SyncHoist Load Positioning
Capacity Per Lifting Point 55 - 85 - 110 ton Max. Stroke 500 - 1000 - 1500 mm
Strand Jacks
Capacity 15 - 1250 ton Stroke 250 - 600 mm Maximum Operating Pressure 350 bar
Jack-Up Systems Capacity Per Lifting Tower
125 - 750 ton Lifting Height Up to 6 - 20 metres
BLS-Series, Climbing Jacks
Capacity per Lifting Point 50 - 200 ton Stroke per Stage 150 - 161 mm Max. Pressure 700 bar
REACH US THROUGH OUR
ADDRESS
4659 & 4661 Kathrina Building Arellano Street, Palanan, Makati City Philippines 1235
TELEPHONE
(02) 832-0560 / 832-0586 / 832-0602
Mobile
0927-243-6655 / 0918-903-6020
info@hydrauking.com
FAX
(02) 8334975