• Heavy duty impact sockets for power driven torquing equipment
• Supplied with “Pin and Ring”
• According ISO 2725, ISO 1174, DIN 3129, DIN 3121 or ASME-B107.2/1995

Accurate, Efficient Torque Multiplication
When accurate make-up or break-out of stubborn fasteners requires high torque

• High-efficiency planetary gear sets achieve high output torque from low input torque
• Most models operator protected by anti-backlash device
• Multiplier output accuracy ± 5% of input torque
• Reversible, tighten or loosen bolts
• Reaction bar or reaction plate type
• Angle-of-turn protractor standard on E300 models
• Reaction plate models offer increased versatility with reaction point locations
• E300 and E400 series replaceable shear drives provide overload protection of internal power train (one replacement shear drive is included).

Your simple solution for smart bolting

Versatility

• Patented firmware design provides accurate fastening on soft, hard, or pre-tightened joints
• Single control box may be used to operate multiple wrench models
• Wrenches and control boxes may be purchased separately or as a set

Performance

• High speed continuous rotation gets the job done faster
• Torque and angle functionality allows input of nominal torque value followed by a specific angle of rotation
• Pass/Fail LED indicator on back of tool verifies fastening has been completed according to specified input

Simplicity

• Control box with large seven-inch touchscreen simplifies tool operation
• Controls on back of wrench enable operator to monitor and manage the fastening process without returning to the control box
• Brightly lit three line LED display on wrench is easy to read in any environment, even in bright sunlight

Traceability

• Fastening record can be viewed on-screen and transferred through standard USB connection on the control box
• Each tool is performance tested and shipped complete with a factory calibration certificate

Safety

• Lift points on wrench enable use with positioning handle or lifting device for greater handling safety
• Ground fault detector protects operator in the event of insufficient grounding

• Enerpac hydraulic bolt tensioners have six load cells from M16 to M95 or from ⅝” to 3¾”
• Twin ports for quick connection of multiple tools
• Only one size of bridge per size of load cell
• Detachable and rotational bridge simplifies bolt tensioner positioning
• Full bridge window
• Piston stroke indicator
• Black surface treatment protects against corrosion
• Anti-slip grip for more secure handling
• Universal and multi-use tool.

• Enerpac bolt tensioner and pump accessories include hoses and quick disconnect couplers for tensioning tools and pumps
• 1500 bar maximum operating pressure.

Hoses	Model Number	Maximum Pressure	Hose Length	End 1	End 2
		(psi)	(feet)
	HT-1503	21,750	3.28	1/4 BSPM 120˚ Cone	1/4 BSPM 120˚ Cone
	HT-1510	21,750	9.84	1/4 BSPM 120˚ Cone	1/4 BSPM 120˚ Cone
	HT-1503HR *	21,750	3.28	BH150	BR150
	HT-1510HR *	21,750	9.84	BH150	BR150

• Enerpac hexagon cassette wrenches feature a high torque-to-weight ratio, slim nose radius and flat design
• High speed, high degree of rotation angle
• Snap in, interchangeable cassettes, no tools required
• 360˚ swivel hose connection allows easier positioning in confined areas
• High repeatability, with accuracy ± 3%
• Strong unibody design, integrated reaction arm and few moving parts make wrenches durable and reliable
• Extensive range of metric and imperial hexagon cassettes and reducers
• Drive unit and cassette come in storage case to protect from damage, water and dirt
• Lock-ring couplers are standard.

* With integrated reaction arm.

Pneumatic torque wrenches provide a simple to use solution for tough bolting jobs, when you want them done quickly and safely.

Productivity

• High speed continuous rotation for constant torque output
• Low friction planetary gearbox design minimizes wear and extends uptime

Safety

• Ergonomic, low vibration design reduces fatigue and the risk of vibration related injuries for the operator
• Low noise air motor provides quiet, consistent performance for indoor and outdoor applications

Convenience

• Provided with standard reaction arm; wide assortment of custom arms and accessories are available
• Available with or without Filter-Regulator-Lubricator (FRL)
• Unique calibration certificate provided with each tool

* To order without FRL and hose, remove “C” Suffix (e.g. PTW3000).
** Weight does not include reaction arm. Reaction arm weight for PTW1000, PTW2000, PTW3000 is 2.9 lbs. and PTW6000 is 7.75 lbs.

We have replaced the S-Series Hydraulic Torque Wrenches with our new S-Series X-Edition Hydraulic Torque Wrenches. Information for the X-Edition tools can be found in the following page: S-Series X-Edition torque wrench page

• Enerpac torque wrenches were designed using state-of-the art CAD techniques to bring you the most advanced square drive hydraulic torque wrench on the market.
• Rigid steel design guarantees durability, reliability and safety.
• Push button square drive release for quickly reversing the square drive for tightening or loosening
• Fine tooth ratchet prevents tool “lock-on”
• 360 degree swivel manifold with screw lock couplers
• Optional Allen key drives 14-85 mm, 1/2 – 2 1/4 inch
• Fast operation due to the large nut rotation per wrench cycle (35 degree) and rapid return stroke
• Constant torque output provides high accuracy (± 3%) across the full stroke
• Includes handle to improve tool handling and safety
• Tested and certified according to ATEX

To order a S-series wrench fitted with the TSP swivel, suffix the model number with “-P”. e.g., S1500-P.

X-Edition square drive hydraulic torque wrenches set a new standard in safety, simplicity and performance

Safety and Performance

• Compact, high-strength uni-body construction provides a small operating radius without sacrificing endurance
• 35° rotation angle and rapid return stroke for fast operation
• Tough manifold design with added safety featurefor enhanced operator safety

Simplicity

• 360° click-on reaction arm with quick release lever provides easier handling, even when wearing gloves
• Includes robust handle which mounts on both sides of tool for extra maneuverability
• Push button square drive release for quickly reversing the square drive for tightening or loosening

Versatility

• Available with optional enhanced tilt and swivel TSP300 manifold for horizontal and vertical maneuverability, with greater durability¹⁾

Accuracy

• Constant torque output provides accuracy of +/-3% across full stroke
• Optional Angle-of-Turn Indicator provides measurement of rotation

¹⁾ TSP300 is designed for X-Edition tools only, and is not compatible with standard edition tools. For replacement components for existing tools, refer to repair sheet

* To order a S-series (X-Edition) wrench fitted with the TSP swivel, insert a “P” prior to the “X” in the tool designation. e.g., S1500PX.

• Enerpac square drive wrenches feature a very high torque-to-weight ratio
• High speed, double-acting operation
• High degree of rotation angle for increased productivity
• Never-jam mechanism
• High repeatability, with accuracy ± 3%
• Slim nose radius and 360˚ swivel hose connection allow easier positioning in confined areas
• Few moving parts means durability and low maintenance
• Push-button drive release; no tools needed to reverse square or Allen drives for tightening or loosening
• Storage case (included) protects from damage, water and dirt
• Lock-ring couplers are standard on all torque wrenches, pumps and hoses.

• Thermoplastic torque wrench hoses
• Dual hoses, 6 and 12 meters long
• THQ-700-series with spin-on couplers for:
  • 700 bar S and W-series torque wrenches
  • torque wrench pumps with suffix “Q”
• THC-700-series with lock-ring couplers for:
  • 800 bar SQD and HXD-series torque wrenches
  • torque wrench pumps

We have replaced the W-Series Hydraulic Torque Wrenches with our new W-Series X-Edition Hydraulic Torque Wrenches. Information for the X-Edition tools can be found in the following page: W-Series X-Edition torque wrench page

• Enerpac torque wrenches were designed using state-of-the art CAD techniques to bring you the most advanced low profile hexagon torque wrench on the market
• Rigid steel design – durabilty, reliabilty and safety
• No tools needed for changing hexagon heads
• Versatility: one hydraulic drive unit per torque capacity can be used to drive any hexagon head within that range
• Innovative, pinless wrench construction with quick release drive and automatic crank engagement
• Fast operation due to the large nut rotation per wrench cycle (30 degree) and rapid return stroke, double-acting
• Constant torque output provides high accuracy (± 3%) across the full stroke
• 360 degree swivel manifold with screw lock couplers
• Optional interchangeable metric and imperial hexagon heads and reducer inserts
• Includes handle to improve tool handling and safety
• Tested and certified according to ATEX

* With in-line reaction foot.
** To order a W-series wrench fitted with the TSP swivel, suffix the model number with “-P”. e.g., W2000-P.

Versatility

• Lean, stepped width design allows tool to be mounted over bolts where other tools won’t fit
• Bi-Hexagonal cassette allows twice as many positioning points on nut or bolt
• Robust top mounted handle stays out of the way, providing safe fastening in hard to reach areas
• Uses same drive unit as standard W-series hexagon cassettes

Performance

• Premium components provide best-in-class endurance compared to other limited access tools

Ease of Use

• Few moving parts are easily accessible for quick field maintenance
• Fast release drive unit enables rapid exchange of cassettes, no tools required
• Top mounted straight handle for improved tool handling and safety

Accuracy

• Constant torque output provides accuracy of +/- 3% across the full stroke
• Calibration certificate shipped with every cassette.

* May also be used with W2000PX and W4000PX drive units, featuring double-swivel manifolds.

X-Edition hexagon hydraulic torque wrenches set a new standard in safety, simplicity and performance

Safety and Performance

• Superior strength to size ratio provides easy access to difficult to reach applications without sacrificing endurance
• 30° rotation angle and rapid return stroke provide fast operation
• Tough manifold design with added safety feature for enhanced operator safety

Simplicity

• Fast release drive unit enables rapid exchange of cassettes, no tools required
• Quick and easy disassembly for maintenance without special tools
• Includes robust handles which mount on both sides, and the tops of cassettes to allow for extra maneuverability

Versatility

• Available with optional enhanced tilt and swivel TSP300 manifold for horizontal and vertical maneuverability, with greater durability*
• X-Edition drive units, cassettes and most accessories are compatible with standard edition tools.*
• Drive unit compatible with UltraSlim and WCR-Series cassettes

Accuracy

• Constant torque output provides accuracy of +/-3% across full stroke

* TSP300 is designed for X-Edition tools only, and is not compatible with standard edition tools. For replacement components for existing tools, refer to repair sheet.

¹⁾ For a full list of available cassettes and specifications, download the Technical Brochure
²⁾ To order a W-series (X-Edition) wrench fitted with the TSP swivel, insert a “P” prior to the “X” in the tool designation, e.g., W2000PX.

Resolves bolt to pipe & bolt height restrictions

• Provides a safe and reliable controlled bolting solution for flanges with limited access
• Spanners available to fit most commonly used API flanges
• Small nose radius – resolves bolt to pipe restrictions
• Slim spanner design – reduces bolt height restrictions
• Wide range of spanners ranging from 36 – 80 mm (1 7/16 – 3 1/8inch)
• Includes handle to improve tool handling and safety
• Rigid steel body for maximum endurance and minimum downtime.

* For total weight add 13.89 lbs for WCR4000, 4.40 lbs. for W4000X and weight of the spanner.